Contact us
Contact us for more information 
Please fill out the form below and we will come back to you by email with more information on this product. If you have any questions or comments to PCH Engineering A/S, please do not hesitate to contact usBy using this form you agree with the storage and handling of your data by this website.
 
Name

Company

Product type, what can we do for you?


Phone

E-mail

Country



 
Please contact me
Please fill in the form and our local distributor will contact you as soon as possibl. By using this form you agree with the storage and handling of your data by this website.
 
Name

Company

Product type, what can we do for you?


Phone

E-mail

Country

  
Technical information
Text technical information...
 
Name

Company

Product type, what can we do for you?


Phone

E-mail

Country

  
top

Digital Monitoring of Vibration Sifters and Conveyors

Measuring actual stroke lenght in mm using PCH 1106 Compact Vibration Sensor on oscillating machines.
 
Is overload of your vibration sifter or conveyor a risk in your process?

An overloaded vibration sifter or conveyor can break down, resulting in costly production stops. By digitally monitoring the actual stroke length of the oscillating machine, you can optimise your process and adjust either feeding parameters or the actual machine capacity.
 

Avoid unscheduled production stops with vibration monitoring

Optimising your process requires adequate knowledge. Often, you can visually monitor an oscillating machine by video cameras and manually prevent production stops. However, this requires that a member of staff continually monitors the machinery, and overload problems are often detected too late.

PCH 1106 continuously monitors the actual stroke length of the oscillating machine digitally. Hence, even small changes in the actual machine performance are detected instantaneously.
 

Digital vibration monitor prevents sifter overload at Orsted Renescience plant

In Danish energy company Orsted's waste-to-energy plant, garbage is separated in a vibration sifter. A process silo conveys garbage into the vibration sifter where solid materials and fluids are separated.

If the solid material starts to block the vibration sifter, the vibration monitor detects a drop in stroke length, sending a digital signal to the process silo, which lowers its output to the sifter. Now, the vibration sifter will receive less garbage for a short period, and the machine overload and resulting production stop is prevented.
 
The red curve shows the exact stroke length of the vibration sifter and the black curve shows the regulated output of the process silo. When the stroke length drops to 14.4 mm the output is lowered until the stroke length increases again. Should the stroke length not increase after a preset period of time, an alarm is activated.
 


 
Contact
a consultant





 

PCH 1106 Stroke Length Sensor

The PCH 1106 consists of a vibration sensor as well as output electronics, which are embedded in a stainless steel housing. The PCH 1106 monitors mechanical vibrations as displacement (mm) in customised filter ranges from 5 Hz up to 80 Hz. The sensor reacts within 0.3 s.

The vibration sensor can be connected to a passive PLC module or any other machine monitoring system. When connected, the actual stroke length is delivered as a 4-20 mA signal to the PLC.
 

PCH 1106 Stroke Length Sensor features:

  • 0-2.5/5/10/15 or 0-20 mm Peak-to-Peak measuring range
  • 4-20 mA / 1-5 V output
  • 24V DC power supply
  • Stainless steel housing with M8 mounting stud
     
Copyright © PCH Engineering A/S - All Rights Reserved.

webpage.io Content Management System.


HTML5 | CSS3