Our Selection of Vibration Sensors and Accelerometers

At PCH Engineering A/S, you will find a range of industrial vibration sensors and accelerometers covering a wide range of industrial applications.

Accelerometers are available in a selection of casings with varying sensitivity and operational temperature limits.

Connect Your Accelerometer with A PCH Vibration Monitor

The accelerometers fit all the PCH vibration monitors and various portable vibration instruments and data collectors. We offer a selection of BNC outputs and junction boxes upon request.

PCH Engineering works closely with CTC (US) and other sensor suppliers in special cases.

Industrial Accelerometers

IEPE and 3-Wire API 678 Accelerometers

In our range of accelerometers, we are confident you will find a transducer to fit your application.

Accelerometers are versatile, full-contact transducers typically used for measuring high or low vibrations or shock. They are suitable for direct mounting on high- or low-frequency elements such as roller bearings, gearboxes and spinning blades.

If you need a non-contact transducer, check out our proximity probes.

We offer transducers with nominal sensitivities of 10/50/100 and 500 mV/g.

Each transducer comes with a calibration certificate documenting its exact sensitivity within the specified tolerance of ±10%. Even lower tolerances can be ordered.

In our range, you will also find accelerometers for ATEX zones and hazardous areas.

And that is not all.

All CTC accelerometers come with a life-time warranty. If something is not right, simply ship it back and you will get a new one for free!

2 and 3-Axis MEMS Accelerometers

PCH Mems accelerometers offer down to DC measurements typically in the range of 0-250 Hz or 0-1600 Hz.

The accelerometers can measure velocity as well as acceleration as the signal conditioning is carried out by our PCH 1420 Vibration Monitor. Accelerometers for 100 mV/g and 300 mV/g are available.

The PCH Mems accelerometer is powered by the PCH 1420 Vibration Monitor or by a separate +24VDC external power supply.

PCH Mems accelerometers come in a sturdy stainless steel housing with an M12 connector and can be freely mounted with 3 x M4 hexagon socket screws.

Cables and Mounting Hardware

PCH Engineering A/S offers a range of cables and mounting hardware for your accelerometer.

The cables come in various types, lengths and with a range of connectors depending upon the job and the environment in which it is to be used.

Contact us at PCH Engineering A/S for professional guidance on choosing accelerometers, cables and mounting techniques.

A few examples of our wide range of mounting hardware are shown below. You can also find a range of interconnection and junction boxes at PCH Engineering A/S.